The Wireless Point Family A complete family of wireless RF sensors, transmitters, loggers, repeaters, receivers and servers spanning the 418MHz. to 2.4GHz frequency range. With an emphasis on modularity and compatibility, The Point Family is ideally suited for a broad range of applications from basic telemetry to custom engineered wireless networking solutions Point Sensors Point Six offers an expanded line of wireless sensors to measure temperature, relative humidity, pressure, vibration, analog voltage and current, and discrete digital inputs. Each sensor is battery operated and fitted with a microprocessor controlled 418 MHz radio transmitter. Point Host Low Cost RS232 or RS422 ASCII output 418 MHz. Receiver The Point Host is an RS232 or RS422 (two models) 418 MHz radio receiver designed to receive and decode packet data from Point Six Wireless LLC Point sensors. The Point Host decodes the CRC-16 encoded packets and translates them to ASCII strings that are sent out the RS232 or RS422 serial port at 19200 Baud. Custom versions available for OEM's. Point Server Rf Receiver with an Integrated Data Server The Point Server is now available for shipping. The Point Server is a 900 Mhz or 2.4 GHz RF receiver with an integrated data Web server, designed to work with the Point Repeater. It receives CRC-16 error-checked data packets from Point Six’s sensors, processes the data, and makes the data available to be queried by simple ASCII commands or through dynamic HTML. Custom versions available for OEM's.Click Here to see real time data. Point Repeater 418 MHz RF Receiver with 900 MHz or 2.4 GHz RF Transceiver The Point Repeater is a 418 MHz RF receiver with an integrated 900 MHz or 2.4 GHz RF transceiver.It receives CRC-16 error-checked data packets from all Point Six 418 MHz Point Sensors within its range, and then transmits the data via the built-in 900 MHz or 2.4 GHz radio to a Point Server. Point Integrator Logger 418 MHz. Radio Receiver/Logger and 1-Wire Interface The PIL is an RS232 or RS485 418 MHz radio receiver designed to receive and decode packet data from Point Six Wireless LLC Point Sensors. The PIL also provides a 1-wire interface designed to provide an ASCII command set for applications that need to accommodate Dallas Semiconductor iButton™ and 1-wire devices and Point Six, Inc. 1-wire sensors and controls. Point Transceivers General Purpose 900 MHz./2.4GHz. Spread Spectrum Frequency Hopping Transceivers The Point Transceiver is a general purpose compact data transceiver perfect for those needing high performance and dependable operation. It’s wireless modem transfers data at 9600 or 19200 baud up to ¼ mile in a city environment or greater than 10 miles line-of-sight with a directional antenna.   Point™ Receiver Palm™ Radio Receiver for Point Six Wireless sensors The Point™ Receiver from Point Six,Inc. is a 418 MHz. radio receiver with a serial interface. Hardware compatible with Palm™ models m130, m500, m515 and i705. Custom versions available for OEM's.     Point Probe Wireless Temperature Probe The Point Probe is battery operated digital temperature sensor with a microprocessor controlled 418 MHz FCC certified radio transmitter. Custom versions available for OEM's.   Point PIR 418 MHz. Wireless Personal iButton™ Unique ID Reader/Transmitter The Point PIR, Wireless Personal iButton™ Reader, reads and transmits Dallas Semiconductor iButton™ unique ID codes. The data is transmitted at 418 MHz. to remote receivers. Point Monitor Palm-to-PC Database Software Point Monitor is designed to receive and log radio transmitions from Point wireless transmitters.